Flip Kick Soccer Assembly Instructions

If you are looking for the rules for how to play Flip Kick Soccer, check out our rules post.

Below is a complete step by step guide to assembling the game field for Flip Kick Soccer.

Main Field

First you will connect the two green main game field pieces.

Lay the playing field inside the main game field. Make sure to insert the tabs on the sides of the playing field into the slots on the game unit.

Flip the game over so you can see the bottom. Place a rubber foot into the four corner holes.

Find the gray center support and align it with the center of the game field. You should line up the holes in the center support  with the holes in the game field. Insert the four screws and tighten them to secure the center support.

Attach the Rod Tacks

Turn over the game field so the top of the field is visible. Find the four rod tracks. Snap them into the slots in the side of the game field.

Take the score labels and attach them to two of the rod tracks. Place the blue score label on the blue side of the field, and the yellow score label on the yellow side of the field. The numbers should face the respective goal.

Attach the score window over the corresponding colored scoring label.

Apply the country flag and soccer ball stickers to the corresponding sections of the game field.

Assemble the Rods

Find the four handles and outer rods. Attach the handles to the end of the outer rods.

Slide the rods through the rod tracks so the handles are on the outside of the field.

Attach a player onto the end of each rod. Place the players on the side of the field that matches their color. The players should be attached so their feet point towards the middle of the field.

Attach a rod connector to two of the inner rods.

Attach the two players from the same team with two inner rods. One of the rods should have a rod connector, while the other does not have one. Attach one inner rod to one of the players and attach the other to the other player. Then snap the two inner connectors together to attach the two players.

Final Assembly

Place one of the flags into each of the corners of the board.

Assemble the two nets. First slide the cross bar into the top of the net. Then insert four goal posts into the four sleeves around the sides of the net. Attach the cross bar to the two nearest goal posts.

Attach all of the goal posts to the goal platform.

Hook the elastic tabs from the net into the slots in the goal platform.

Lift up the game up and slide one goal into each side of the game unit.